VGD - 290 "Ohotnik"
280 000 руб.

VGD - 290 "Ohotnik"

Model VGD - 290 "Ohotnik" is great for all-wheel drive cars, not exceeding the total weight of 2000 kg. A unique and patented technology of changeable contact area with surface allows you to enjoy the ride on different types of surfaces at any time of the year. The reliability of the structure is ensured by a strong galvanized frame, covered with polymer paint, and a crawler system designed for movement both over dirt and snow. The system have a good, self-cleaning protector with a width of 290 mm. and the height of the grouser is 22 mm. Installation and dismantling by an adult with a minimum of tools takes from 40 to 60 minutes.

Model
VGD - 290 "Ohotnik"
Set
set / 4 pcs (optional: 2 caterpillars and 2 skis)
Exclusive system, excluding overturning caterpillar block
provided by the construction
Radial crawler block stop
optional
Size
1485х530х755 mm.
Total weight
600 kilograms pre set / 150 kilograms - 1 pcs
Vehicle type
4x4; 4x2 (with skies)
Max weight (full)
up to 3500 kilograms (on an axis)
Caterpillar size: width and length
500х3937 mm
Used for
land covered with snow
Frame material
steel
Anticorrosion coating frame
polymer coating by galvanic method -12 microns (optional)
Caterpillar material
multilayer composite rubber
Type Tread of caterpillars
off-road, self-cleaning
Recommended operating temperature
from 40 ° C to +30 ° C
Increasing the width of the vehicle
500 mm (+/- 50 mm ... depending on the vehicle)
Increase in ground clearance
from 150 mm to 280 mm (depending on the vehicle)
The area of contact with the surface
max.- 2.8 square meters., min. - 1.44 square meters.
Ground pressure (depending on the vehicle)
the minimum is 0.06 kg / cm2, the maximum is 0.21 kg / cm2
Wheels
diameter 180 mm, ball bearings, closed, additionally protected, oil seals
Material of wheels
steel, polyurethane (rim)
Color
optional
Recommended speed
depending on the vehicle
Turning radius
unchanged from TTC TS
Повышение крутящего момента
1.7-2.5 (depending on the drum size)
Max lifting angle
30% - 40% (depending on terrain and coverage)