VGD - 500 "Polyarnik"
580 000 RUB

VGD - 500 "Polyarnik"

Model VGD - 500 "Polyarnik" is great for all-wheel drive cars, not exceeding the total weight of 3500 kg. A unique and patented technology of changeable contact area with surface allows you to enjoy the ride on vehicle. The reliability of the structure is ensured by a strong reinforced frame with an anticorrosion coating electrochemical oxidation, galvanized elements and coated with polymer paint. Caterpillars are designed for movement on different types of snow cover. The system has a width of 500 mm., Which will allow heavy cars to drive both on plump snow and heavily frozen snow in February. Installation and dismantling by an adult with a minimum of tools takes from 40 to 60 minutes.

Model
VGD - 500 "Polyarnik"
Set
4 pcs (optional: 2 caterpillars and 2 skis)
Exclusive system, excluding overturning caterpillar block
provided by the construction
Radial crawler block stop
optional
Size
1485х530х755 mm.
Total weight
600 kilograms pre set / 150 kilograms - 1 pcs
Vehicle type
4x4; 4x2 (with skies)
Max weight (full)
Up to 3500 kilograms (on an axis) 1750 kilograms
Caterpillar size: width and length
500х3937 mm
Used for
land covered with snow
Frame material
steel
Anticorrosion coating frame
polymer coating by galvanic method -12 microns (optional)
Caterpillar material
rods / kevlar
Recommended operating temperature
From 40 ° C to +30 ° C
Increasing the width of the vehicle
500 mm (+/- 50 mm ... depending on the vehicle)
Increase in ground clearance
from 150 mm to 280 mm (depending on the vehicle)
The area of contact with the surface
Max.- 2.8 square meters, min. - 1.44 square meters
Ground pressure (depending on the vehicle)
the minimum is 0.06 kg / cm2, the maximum is 0.21 kg / cm2
Wheels
diameter 160 mm, ball bearings, closed, additionally protected, oil seals
Material of wheels
Steel, polyurethane (rim)
Color
optional
Recommended speed
depending on the vehicle
Turning radius
unchanged from TTC TS
Max lifting angle
30% - 40% (depending on terrain and coverage)
Radial blocker limiter
optional